Stainless Steel Fittings

Product Details:

The function of a Stainless Steel 45 Degree Elbow is the same as a 90 degree elbow, but the measurement of dimensions is different to that of the 90 degree elbow. The radius of a Stainless Steel 45 Degree Elbow is the same as the radius of the 90 degree L.R. elbow where ‘R’ equals 1½D. However, the centre to face dimension is not equivalent the radius as in 90 degree L.R. elbows. This is measured from each face to the point of intersection of the centre lines perpendicular to each other. This is due to the smaller degree of bend. Stainless Steel 45 Degree Elbow, also called “45 bends or 45 ells” are typically made as LR (Long Radius) elbows. Available in various sizes (in mm or inches), 45 degree pipe elbow is available with different male to female BSP thread connections. Providing a wide choice of colors, these elbows can be manufactured to meet different specifications, in terms of size and diameter. They can be made from different materials like 3 ply material, silicone etc and both long and short radius elbows are available in the market.

 

Applications:

Stainless Steel 45 Degree Elbow find frequent applications in:

• Water supply facilities
• Food industrial pipeline networks
• Chemical industrial pipeline networks
• A welded system utilises a minimum of space.
• Electronic industrial pipeline networks
• Air conditioning facility pipeline
• Agriculture and garden production transporting system
• Pipeline network for solar energy facility

 

Other Details:

Product Details:

Uniflex India is one of the prominent supplier, manufacturer and exporter of SS Wire / Filler / Electrode, which maintains good corrosion resistance in applications where the temperature is between the range of Degree F and Degree F. However, acids and acid solutions containing halide ions can be very aggressive, and the corrosion resistance of our Stainless Steel Filler Wire may possibly be insufficient. Oxidation resistance of this Stainless Steel Electrode is high for continuous service to Degree F, intermittent to Degree F. Often in many product forms, the grain size and carbon content can meet clients’ requirements, where aqueous corrosion resistance is comparable to our Stainless Steel Welding Wire. Heat treatment according to this Stainless Steel Welding Electrode requires a solution anneal at Degree F, and then air cool, further age at Degree F for 16 hours and then air cool. We also offer the same in different grades such as Stainless Steel Wire / Filler / Electrode, Stainless Steel Wire / Filler / Electrode, Stainless Steel Wire / Filler / Electrode, Stainless Steel Wire / Filler / Electrode, Stainless Steel Wire / Filler / Electrode, Stainless Steel Wire / Filler / Electrode, Stainless Steel Wire / Filler / Electrode, Stainless Steel Wire / Filler / Electrode, Stainless Steel Wire / Filler / Electrode, and more.

Additional Information:

• Delivery Time: 4-5 DAYS

Product Details:

Uniflex India is one of the exporter of all types of Forged Fittings and Pipe Products. Our company is the leading supplier to many govt.and various industries like Gas Processing, refineries, pharmaceuticals, cement, power generation etc.

Product Details:

There are two basic types of sub end, A.S.A. long barrel, and M.S.S. short barrel. Under certain design criteria such as temperature or pressure etc, it is not acceptable to have the joint between stub end and pipe in close proximity with the flange joint; in these applications A.S.A. types are used. We are indulged in crafting of caps and stub ends to serve the functionality to the best. Premium quality raw materials are used to craft these caps and stub ends which add strength and durability to these products. These steel butt weld cap and stub end fittings are excellently serving the purpose of functionality. We offer these caps and stub ends at market leading rates.

Material Type: 

• Nickel Alloy: ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )
• Stainless Steel: ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
• Duplex Steel: ASTM A 815 UNS NO S 31803 , S 32205
• Carbon Steel: ASTM A 234 WPB , WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
• Alloy Steel: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
• Low Temperature Carbon Steel: ASTM A420 WPL3 / A420WPL6

 

Value Added Services:

• Hot Dip Galvanizing
• Epoxy Coating
• Electro polish

Product Details:

Manufacturer of comprehensive range 304 Stainless Steel Washer, 304 Stainless Steel Washer price listyour source for 304 Stainless Steel Washer, Manufacturer and Supplier of the most qualitative range of 304 Stainless Steel Washer

Product Details:

Product Specification Product DescriptionWe are leading supplier of Stainless Steel Dairy Elbow Fittings. It is also known as Stainless Steel Dairy Fittings, Elbow Fittings, Dairy Fittings.

Product Details:

The function of both types of reducer is to reduce the line from a larger to a smaller pipe size, this obviously results in an increased flow pressure. With the eccentric reducer the smaller outlet end is off centre to the larger end enabling it to line up with one side of the inlet and with the other. The concentric reducer is so manufactured that both inlet and outlet ends are on a common centre line. The concentric type is easier and less expensive to produce but does not allow quite the same versatility as the eccentric reducer. The lengths of both types are fixed by manufacturing standards. We offer the international quality pipe reducers made up of steel and other alloys. Steel Pipe Reducers available are of concentric and eccentric types. The pipe reducers are suitable components in pipelines that reduce pipe size from large to small bores. The inlet and outlet ends of the steel pipe reducers and alloy pipe reducers align to a common center line.

Material Type:

• Nickel Alloy: ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )
• Stainless Steel: ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
• Duplex Steel: ASTM A 815 UNS NO S 31803 , S 32205
• Carbon Steel: ASTM A 234 WPB , WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
• Alloy Steel: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
• Low Temperature Carbon Steel: ASTM A420 WPL3 / A420WPL6

 

Value Added Services:

• Hot Dip Galvanizing
• Epoxy Coating
• Electro polish

Product Details:

LR (Long Radius) elbows. SR (Short Radius) elbows have a Center-to-Face dimension of 1.0 X diameter and are typically used in tight areas where clearances are an issue. LR (Long Radius) elbows have a Center-to-Face dimension of 1.5 X diameter and are the more common type and used when space is available and flow is more critical. This is a fitting device which is bent in such a way to produce Stainless Steel 90 Degree change in the direction of flow of the content in the pipe. An Elbow is used to change the direction in piping and is also sometimes called a “quarter bend”. A Stainless Steel 90 Degree elbow attaches readily to plastic, copper, cast iron, steel and lead. It can also attach to rubber with stainless steel clamps. Available in many materials like silicon, rubber compounds, galvanized steel etc, they connect rigid or IMC circuit together to allow for Stainless Steel 90 Degree bends. The main application area of an elbow (Stainless Steel 90 Degree ) is to connect hoses to valves, water pressure pumps, and deck drains. These elbows can be made from tough nylon material or NPT thread.

 

Long Radius Elbow:
The most common is long radius (L.R.) elbow where the centre to face dimension (A) is always 1 ½ times the nominal pipe size of the elbow.

 

Short Radius Elbow:
In this case the centre dimension(A) is the same as the nominal pipe size of the elbow.

 

Extra Long Radius:
This is where the centre to face dimension is longer than the standard long radius type. The most common of these is where the centre to face dimension is three nominal size, i.e. 3D.

 

Other Details:

 

Product Details:

The function of a 180 degree return is to change direction or flow through 180 degree and there are two basic types, long radius and short radius. Both types have a centre to centre dimension double the matching 90 degree elbow. The primary applications for these fittings is in heater coils and heat exchangers. We have earned prominent name in designing of Elbow (180°) fitting. These pipe fittings serve wide range of functionalities in outstanding way. The Elbow 180 degree is crafted with great precision by our experienced staff. We provide best rates for elbow 180 degree.

Grades:

• Nickel Alloy: ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )
• Stainless Steel: ASTM / ASME SA 403 GR WP “S” / “W” / ” WX” 304 , 304L, 304H, 304N, 304LN, 309, 310H, 316, 316H, 317, 317L, 321, 321H, 347, 347 H.
• Duplex Steel: ASTM / ASME SA 815 UNS NO.S 31803, S 32205, S 32550, S 32750, S 32760.
• Carbon Steel: ASTM / ASME A 234 WPB, WPC, ASTM / ASME A 860 WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
• Alloy Steel: ASTM / ASME A 234 WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 23, WP 91.

Product Details:

The function of a tee is to permit flow at 900 to the main direction of flow the main flow passes through the ‘run’ whilst the 900 outlet is known as the ‘branch’. The equal tee is manufactured with all three outlets being the same size. The reducing tee is manufactured with the branch outlet smaller than the run to obtain the desired flow and pressure through the system. We offer Equal Tee Fittings and Equal Cross Fittings a wide range of dimensions which makes them suitable for interlinked plumbing systems confined in an area. Our Equal Tee fittings resemble the alphabet ‘ T ‘, where two horizontal and one vertical pipes can be attached. Our range of Equal Tee and Equal Cross are flawlessly engineered using latest technology and are widely used in diverse piping systems across industries.

 

Grades:

• Nickel Alloy: ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )
• Stainless Steel: ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
• Duplex Steel: ASTM A 815 UNS NO S 31803 , S 32205.
• Carbon Steel: ASTM A 234 WPB , WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
• Alloy Steel: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
• Low Temperature Carbon Steel: ASTM A420 WPL3 / A420WPL6

 

Value Added Services:

• Hot Dip Galvanizing
• Epoxy Coating
• Electro polish

Product Details:

We offer Unequal Tees and Unequal Cross, which are widely preferred by users due to their accurate tensile strength, corrosion and abrasion resistant and excellent finish. These unequal tees fittings and unequal crosses fittings require negligible maintenance. Our range of unequal tees are suitable for use in very high, as well as in low temperature. The unequal crosses find application across diverse ndards.

The function of a cross is similar to that of a tee with the exception of providing two 900 outlets opposite each other. Equal crosses have all four outlets of equal size. Reducing crosses have branches that are smaller in size to that of the run to obtain the desired flow and pressure through the system

Material Type:

• Nickel Alloy: ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )Stainless Steel: ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
• Duplex Steel: ASTM A 815 UNS NO S 31803 , S 32205
• Carbon Steel: ASTM A 234 WPB , WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
• Alloy Steel: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
• Low Temperature Carbon Steel: ASTM A420 WPL3 / A420WPL6

Product Details:

Our team of skilled and trained professionals has enabled us to provide reliable assortment of Stainless Steel Cylinder Sleeve. The provided sleeve is manufactured by our dexterous experts using the best grade raw material and sophisticated technology in complete adherence to defined quality norms. Additionally, our team of quality auditors examines this sleeve on different quality parameters. The offered sleeve can be availed by our valuable clients in different sizes at rock bottom prices.

Additional Information:

• Delivery Time: 12 - 5 DAYS